Submit Here

Design and Implementation of a short message service (SMS) Based Home Automation System

August 14, 2019
Advertisements

Isah et al

Greener Journal of Science, Engineering and Technological Research

Vol. 9(2), pp. 19-23, 2019

ISSN: 2276-7835

Copyright ©2019, the copyright of this article is retained by the author(s)

DOI Link: http://doi.org/10.15580/GJSETR.2019.2.070719131

http://gjournals.org/GJSETR

 

 

 

Design and Implementation of a short message service (SMS) Based Home Automation System

 

 

Isah Abdulazeez Watson1, Jimah Kadijhatu Quincy2, Audu Muhammad Lukman3

 

 

 

1, 2, Department of Electrical &Electronic Engineering, Auchi Polytechnic, Auchi, Edo State.

3Department of Mechanical Engineering, Auchi Polytechnic, Auchi, Edo State.

 

 

 

ARTICLE INFO ABSTRACT
 

Article No.: 070719131

Type: Research

DOI: 10.15580/GJSETR.2019.2.070719131

 

  

This paper discusses the Design and Implementation of a short message service (SMS) Based Home Automation system. In this work, an Arduino Uno board featuring an Atmega 328P Microprocessor is used. Other hardware components used are: Global System for Mobile Communication (GSM) SIM900 module, a regulated 12V and 5Vpower supply unit, a relay board, a ULN2003 relay driver I.C, and a 16×2 LCD display unit. The software components involve the Arduino Software and the driver for the GSM SIM900 Module. The appropriate drivers were installed for the boards while the necessary libraries were included on to codes using the Arduino Integrated Development Environment (IDE). The 12V power supply from the power supply unit feeds the GSM Module and the relay board. The RXD pin of the SIM900 Module is connected to the TXD terminal of the Uno board. The TXD pin of the Sim900 is connected to the RXD terminal of the Uno board. The 5V power supply goes to the Arduino Uno. Thereafter, the Uno board is connected to the laptop for inclusion of appropriate libraries. Codes are uploaded and an ETISALAT Sim Card is inserted in to the GSM Module. The digital pins are configured to drive the relay board. The output terminals of the relays are set to drive the required loads in the home. The system was used to drive a 40 watts Energy saving bulb and a standing fan. It was very fast to switch on the lamp due to the strength of the Etisalat network in my office. The efficiency and reliability of the system is network dependent. Most interesting is that the lamp could be switched on or off from anywhere within the country.
 

Submitted: 07/07/2019

Accepted:  09/07/2019

Published: 14/08/2019
 

*Corresponding Author

Isah Abdulazeez Watson

E-mail: isah505@ gmail. com

Phone: +2348062416511
 

Keywords: Arduino Uno Board; Atmega382P Microcontroller; GSM Module; SIM900; Integrated Development Environment
   

 

Return to Content       View [Full Article – PDF]

[Full Article – HTML]               [Full Article – EPUB]

  

 

REFERENCES

 

[1]   Bruhathirreddy, C., Kodandaramaiah, G.N., & Lakshmipathy, M. (2014). Design and Implementation of Home Automation System Using RASPBERRY PI, International Journal of Science, Technology & Management, Vol.3, pp.94-98. 

[2]  Mohamed, S.S., Ahmed, A., Alahmadi, A., Mash, A., & Mohamed, O.E. (2017).   Design and Implementation of a Real- Time Smart Home Automation System Based on Arduino Microcontroller Kit and Labview Platform, International Journal of Applied Engineering Research” Vol.12, no.18, pp.7259-7264.

[3]    Effah, E., Aryeh, F.L., & Kehinde, W.K. (2016). GSM Based Home Appliances Control System (HAC) For Domestic Power Users in Ghana, 4th Umat Biennial International Mining and Mineral Conference, pp. ce58-64.

[4]   Akanksha Singh, Arijit Pal and Bijay Rai, (2015). GSM Based Home Automation, Safety and Security System Using Android Mobile Phone”, Vol.4, no.5, pp.490-494.

[5]   Amruta Patil, Pooja Potnis and Karishma Katkar, (2017). SMS Based Home Automation System Using Arduino Atmega328 with GSM”, International Journal of Engineering Research and Technology, Vol.4, pp.369-373.

[6]   Piyare, R., Tazi, M.   (2011).  BLUETOOTH Based Home Automation System Using Cell  Phone, IEEE 15th International Symposium on Consumer Electronics.

[7]   Suraj Tonnage, Sandhya Yemul, Rajendra Jare and Veena Patki, (2015). IOT Based Home Automation System using Nodemcu Esp8266 Module”, International Journal of Advance Research and Development, Vol.3, no.3, pp.234-238.

 

 

 

Cite this Article: Isah, AW; Jimah, KQ; Audu, ML (2019). Design and Implementation of a short message service (SMS) Based Home Automation System. Greener Journal of Science, Engineering and Technological Research, 9(2): 19-23, http://doi.org/10.15580/GJSETR.2019.2.070719131.

Journal Name : citation_journal : Greener Journal of Science, Engineering and Technological Research 

Publication Status/Date : usp_status_date : 14/08/2019

Leave a Reply

Your email address will not be published. Required fields are marked *